Worldwide Campaign to stop the Abuse and Torture of Mind Control/DEWs
I have been able to stop the torture on me using "Room Correction" and "Bass Boost" along with an AM Radio that can pickup an AM signal from the "BassBoost" on Windows. The room correction is recognized by most torture systems are being all the room corrections that have been used for "setup" from the time you clear the "Room Correction" by unchecking it and hitting apply, to the very last one you run setup with the previous one still active.
So when I run a "Room Correction" setup in audio settings, I can add other effects by taking another reading and setup while the last setup is active. This makes "Bit Shifting" a very powerful tool for defense against a system that uses Sound and the human body to communicate using telepathy. it is needed to communicate correctly and is also needed to stop the ones taking advantage of their experience in the system and use of computers to out do your every thought and move.
Telepathy communication is the definition of the up an comping technology leap that has been n the news as the future way to communicate for years. Using silent brainwaves and muscle movement in the larynx, a user is able to communicate accurately and fluidly with thier desired self being ht e "person" they are, which is usually the preferred way someone is wanted to be seen. Like being forced to be the conscious self you strive to be or realizing ythe self you have ye to find in the few true reactions that are not hidden while thinking is heard outloud. The undeniable glimmer of potential that everyone most likely has can be shown and people can become the person they want to be easier and with reward of a true good self to have as a badge of honor on display for all to hear.
Match all of these programs either WITH or WITHOUT a AM Radio Boom Box with bass boost as well. MAKE SURE YOU HAVE ALOT OF FEEDBACK, rUN THE SETUP WITH 24DB, THEN AT THE END TURN ON 21DB TO GET A "SUB-BINAURAL" TYPE OF INPUT THAT DEALS WITH DECIBELS AND NOT HERTZ.
If you cannot find or tune an AM Radio to pick up the radio signal from bass boost, you can still make it work by creating alot of feedback. But you will have good results with a larger than laptop type speaker.
BASICALLY TO GET FREE FROM TORURE:
1. TURN ON LISTEN TO MICROPHONE.
2. MAKE SURE THE QUALITY OF MICRPHONE AND SPEAKERS ARE DEFAULTED.
3. CREATE GOOD FEEDBACK AND USE A PERSISTENT BACKWARD MACHINE ON AUDACITY.
4. SET BASSBOOST TO 50HZ AND 24DB.
5. CLEAR THE ROOM CORRECTION CHECK BOX AND HIT APPLY.
6. MATCH ALL THE SETTING ON ALL THE PROGRAMS IN THE PICTURE ATTACHED.
7. CONFIGURE BITSHIFTER TO MATCH THE "1" SETTINGS
9. CHECK THE ROOM CORRECTION BOX AND DO NOT HIT APPLY.
9 CLICK SETUP ROOM CORRECTION, THEN RUN THE SERIES OF BEEPS.
10 REPEAT THIS FOR THE OTHER 3 BIT SHIFTER SETTING "2-4"
11. AFTER MIXING THE DIFFERENT SETTINGS, CHANGE BASS BOOST "DECIBEL" TO 21DB
12. TURN ON BLOW FLY.
13 ADJUST MINOR SETTINGS AND ALWAYS REMEMBER THAT THE METHOD LEADS TO FREEDOM EVERYTHING NO MATTER WHAT OR WHO YOU ARE, YOU SHOULD BE FREE FROM CRITICISM GOOD OR EVIL, PEOPLE SHOULD ACT POLITELY AND THAT IS HOW YOU WILL KNOW YOU HAVE DONE IT CORRECTLY OR INVESTED THE AMOUNT OF TIME REQUIRED TO TUNE YOUR OWN DEFENSES.
YOU MUST INSTALL BACKWARD MACHINE INTO AUDACITY. WHEN THIS IS DONE, YOU WILL SET BACKWARD MACHINE TO REVERSE PLAYBACK, WITH 20% FEEDBACK. 100% WET AND 5% DRY. IT MUST BE ON DURING THE WHOLE PROCESS!!
ALSO REMEBER TO MOVE THE RADIO YOU CHOOSE, HOPEFULLY A BOOM BACK WITH BASS, TO MOVE THE RADIO AROUND THE COMPUTER TO PICK UP RECEPTION AND ADJUST DEPENDING ON DISTANCE. THE GOAL IS TO HAVE A FEEDBACK ON BOTH THE RADIO AND COMPUTER. THE FEEDBACK IS THE MOST IMPORTANT THING AND MUST BE FINE TUNED ACCORDING TO MACHINE USED AND RADIO NOISE..
CONSTANT FEEDBACK SHOULD BE HEARD THE WHOLE TIME SETTING UP AND WHILE IN BLOWFLY MODE.
THIS SHOULD BE ALL OF THEM
Make sure to use a radio with bass boost at some point, a radio with radio on and volume all the way down during room correction setup will work as well. But it is good to experiement with a boom box and their bass.
While running the bitshift with multiple room corrrections, you will want an opposit feedback on the radio and having some bass is a good thing. an old boom box is what I am using right now.
Another good way of getting relief is to use this bit shift pattern during room correction:
1 unconditionally set 4-8 to 0
2. Shift left 2
3. Shift left 2
4Unconditionally set 4-8 to 0
Then the idle setting at the end should be : "Rotate by 2 leavning left most bit" and the slider should be a red "Band Stop" type that covers bottom half of the "high shelf", which is the high frequency outermost side and is the counter part of the "low shelf" that is the lower frequency outermost side. Stretch the red bar to cover the top of the "O" in "Other Bit Operations" al the way down to the bottom of the bubble for "Shift 2 to the left"
A more advanced defense is to create a "Sine Image" with the Bass Boost. The way you do that is by running the Room Correction with polar opposite of either the decibel settings or hertz setting on bass boost. Then each subsequent one with be a notch higher. So 50hz and 3db, then 50hz and 6db, then 50hz and 9db, etc...
You should also use "Sound Shaper" to create a the same image type, which is with the top four sliders all the way to the right and the bottom two at the middle. This will give you the basic shapoe, but you will want to even them out. to look both 3d and even.
Another quick fix is to just run "room correction" with this order: 1. 50 hz 3db, 2. 50hz 9db. 3. 50hz 6db
Then, turn on blowfly and you should notice a difference.
There are many combos you can use and experimenting with different ones may give you better results.
It will NOT WORK! Are you serious?
It definitely works, I have a very powerful torture system and it works everytime, especially with a radio. Most torture systems are the same .
Right now I am being guarded by a computer system that takes my side everytime, then stops any pain or arguements.
The main goal is to get used to anipulating your "tone", which should be audible when pressing in your ear on the right side, if you cant hear it, it is just so low that only your brain can hear it. My tone is loud and when I press my ear in and move, the tone will sound off and transmit the movement in the form of tones.
A good way to manipulate the tones in order to be seen, you can use a tiny green or red bar at the opposite ends of the sound spectrum represented on the bitsynth program. the red and green bars are band pass and band stop. the different combinations of the two sides on room correction will determine the systems reaction.