peacepink

Worldwide Campaign to stop the Abuse and Torture of Mind Control/DEWs

Torture prevention audio using bit shifter and room correction

I have been able to control the system that tortures me using my computer, bass boost and room correction. The bass boost option in the sound settings is only on some systems and you must disable the high range setting first to see it in options, which is replaced by bass management if it is not disabled. Then using a bit shifter and room correction along with an AM Radio that picks up the computers sound at about 1400hz, a victim will be able to stop mist attacks.

First startup the bit shifter that I have attached and start up the radio that picks up bass boost. Then a victim should run the room correction with the bitshift and radio running, which is better if it is a boom box type with bass. A victim will need to run about 4-5 room corrections back to back with the bass boost set at about 300-500hz with the decibel level at 24db. You will also need the "listen to speaker" option set in the microphone settings.

The first bitshift you will run with a full green bar is the "shift 4-8 to zero" this is done first and will be hit with feedback from the "listen to speaker option in the microphone settings. Second bit shift will be the longest description setting that will change bits 3 and 4 according to them being 1 or 0. Third you will bitshift the last setting " switch the places of 2-3 with 5-6". Then using a red bar instead of all green, highlight the middle of the bar with red and leave the top and bottom open and run "Rotate bits by left leaving left most untouched". Now you willl see the system totally change and every bass feedback or listen to speaker feedback you hear will be in your favor and can stop most torture.

Then set your booster decibel boost level to zero while keeping the hertz boost the same and enjoy the benefit.

You will need Blowfly to make the room correction work and is attached along with the bitshifter and a phaser that you will set to halfway for each setting.

Set blow fly to PRandom and Srandom with ARCSIN, then move the first three sliders all the way to the left with the last slider being on the right. The move the first slider about a few clicks to the right and the last slider a few clicks to the left. Blow fly is one of the only programs that makes a random sound constantly.

I will update with a better explanation soon, please send message if you have any questions.

Views: 127

Attachments:

Reply to This

Replies to This Discussion

At the end of running the multiple room corrections with the booster at 24db, set it to 0 to get the benefit.

I will update with pictures soon

In the end when you all are familiar with this, you will eventually need to find a radio that "sets itself", which is made by a few different companies, the one I use is a emerson research clock radio that has a "satellite" connection. The radio must emit a low bass sound when the radio and everything is turned off and it is idle.

You then take "Room correction" setups with this and use "Omnidirectional microphone scheckbox at the beginning of setup. The computer will think that the low bass sound is being taken from the opposite side of the mic on your laptop or computer. This is a must for more freedom.

In the end when you all are familiar with this, you will eventually need to find a radio that "sets itself", which is made by a few different companies, the one I use is a emerson research clock radio that has a "satellite" connection. The radio must emit a low bass sound when the radio and everything is turned off and it is idle.

You then take "Room correction" setups with this and use "Omnidirectional microphone" checkbox at the beginning of setup. The computer will think that the low bass sound is being taken from the opposite side of the mic on your laptop or computer. This is a must for more freedom.

Reply to Discussion

RSS

Latest Activity

Sandy Lomax commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"I forgot to say, I am not a US citizen. It is for US citizens, giving their US city."
18 minutes ago
Sandy Lomax commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"I have looked on the website Targeted Justice and tried tried copying to email but I still could not sign it. It says you have to return it to the email given there. Please advise, thank you."
26 minutes ago
Sipho commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"Can't sign please help."
4 hours ago
Sipho commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"Can't open where I suppose to open."
4 hours ago
Sipho liked Soleilmavis's blog post Petition to the U.S. Attorney's office
4 hours ago
Sipho commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"Good work indeed"
4 hours ago
SUDIP DASGUPTA commented on Soleilmavis's blog post Petition to the U.S. Attorney's office
"Dear All, I positively support this. The first thing that I want in my life is to punish these criminals who have virtually slaughtered many innocent lives and destroyed peace, prosperity and happiness from all our lives. Thanks, Sudip Dasgupta"
5 hours ago
SUDIP DASGUPTA liked Soleilmavis's blog post Petition to the U.S. Attorney's office
5 hours ago

Badge

Loading…

© 2019   Created by Soleilmavis.   Powered by

Badges  |  Report an Issue  |  Terms of Service