Radiator reflector

Having watched the Barrie Trower interview I want to find material that can block EMF. Sheet metal certainly but it is dificult to handle and hard to shape.  So I went and bought some radiator reflectors and see if it helps. I know in my case when I am in the house the EMF is directional.

I have also constructed a card board panel with 3 layers of tin foils and compare it with the radiator reflector. The test conditions were. There are patches of the house with unknown EMF, the RF scanner scale when maximum even at lowest sensitivities.  When I move the reflect toward the windows direction the signals drops. Hence I can tell that particular EMF field comes from opposite, from the window. 

The 3 layers tin foil works ok too, but not as good. I think 1 layer is too thin and Barrie say there are holes in them, worse of all tin foil is known to react to other acidic substance and corrode.

Please don't all go out and but lager number of radiator reflector. This is just a preliminary test. It is not the solution to all cases. 

Microwave can travel through walls so, it is hard to block them all. but if there are specific area you find it is viable to block then I would recommend the radiator reflector if you don't want to use sheet metal.

I know they are not exactly cheap, so if on a tight budget. find a large piece of cardboard and stick 4-5 layers of tin foils and see if it helps.

E-mail me when people leave their comments –

You need to be a member of Peacepink3 to add comments!

Join Peacepink3